Sliding Electric Gate Kit V2 Alfariss 24volt

V2
  • Description
  • More Details
ALFARISS PLUS
  • Built-in digital control unit
  • Housing of the backup battery
  • Painted aluminium casing
  • Accurate and safe operation with encoder
  • Obstacle detection
  • Programmable acceleration and deceleration
  • Self-learning of opening and closing times
  • Operation in case of absence of power using the B-PACK backup battery
  • Operation with solar power using the ECO-LOGIC system
  • Synchronized operation of two motors using the SYNCRO module
  • Magnetic limit switches, all accurate and reliable over time

24v V2 Alfariss sliding electric gate kit for gates up to 300kg

24volt Electric gate kit for sliding gate automation. The kit is supplied with two keyfob transmitters, one infrared safety beam set and four metres of toothed rack.

 

 

FEATURES UNITS 23B002
Gate maximum weight kg 300
Power supply V / Hz 230/50
Maximun power W 150
Full load current A 3
Gate maximum speed m/s 0.14 ÷ 0.26
Maximum thrust N 330
Duty cycle % 50
Pinion - M4-Z16
Working temperature °C -20 ÷ +55
Weight Kg 7.5
Protection degree IP 44
Maximum load on 24 Vac accessories W 7
 
  • Programming achieved using 3 program buttons and display
  • Plug-in adaptor for modular radio receiver MR2
  • 2 inputs for photocells with self-test function
  • 2 inputs for mechanical or resistive safety edges
  • Output for flashing light 24V with or without intermittence
  • Courtesy light output
  • Energy Saving function to minimise consumption in stand-by mode
  • Self-learning opening time and obstacle detection function
  • Operational cycle counter, with programmable maintenance reminders
  • Slowing down in the limit switch area
  • Soft start (programmable start-up rate)
  • Monitoring of input status using the display
  • ADI connector for connecting CL1+, WES-ADI, SYNCRO optional modules
 
A sample installation of the V2 Alfariss gate actuator kit showing some optional items.
 
1 - ALFARISS actuator
2 - Rack
3 - Flashing light with built-in antenna
4 - Photocells
5 - Key switch
6 - Transmitter
7 - Pillar photocells
8 - Pillar-mounted digital radio switch
 
 
 
11B047
MR2 - 433.92 MHz plug-in receiver module. Also available in 868.30 MHz version (code 11B048)
162313
Nylon rack M4 - 6 attachments 1 m long with metallic insert
162329
Galvanised metal rack 30x8 M4 1m long with fixing kit
CL1+
Optional module permitting blocking of programming of digital control units (thus avoiding third party tampering) and copying of memory card content for transfer to other units of the same type (by ADI connector).
162322
Galvanised metal rack 30x12 M4 1m long with fixing kit
WES-ADI
Optional card for radio control of safety devices using WES sensors
162330
Additional anchoring clamps
SYNCRO
Pair of optional modules enabling synchronized operation of 2 sliding motors (compatible with motors ALFARISS, AYROS, and FORTECO).
161212
Battery pack with built-in battery charger
ACC009
Warning sign
__ifPurchasable__
__endifPurchasable__